Truss Gateway 4 RDM offers high levels of electrical protection. All outputs are protected against mains electrocution (international voltages including UK 3-phase) and are self-healing.

A handy button enables the customer to simply restore the factory default settings (hold down and cycle power). A single press of this button causes the product to emit a ‘squawk’, a message over the network that enables the console operator to easily identify the physical location of the product.

Gateway can be powered from either 100 - 240V AC or via PoE (Power over Ethernet). The latter requires a suitable ethernet switch for the power source. Please note that the product should be powered via EITHER the AC input or ethernet PoE, but not both (there is no option to failover from one power source to the other if both are connected).

The product has an RJ45 ethernet connector and supports Art-Net 4 and sACN (ESTA E1.31). Requires Cat 5 cable or better and supports 10BaseT and 100BaseT.

Configuration is achieved over the network using the internal web-server. DHCP is supported for automatic IP address allocation.

• 10/100BaseT RJ45 (Ethercon) input

• 4 bidirectional DMX512 ports, compatible with all variants of DMX, including DMX512-A

• Merge per output

• Art-Net, sACN, RDMnet RPT & LLRP compatible

• mDNS compliant

• RDM (E1.20 - 2010/2024) compatible

• Power, Ethernet & DMX port LEDs

• Failsafe mode

• Default IP address 2.x.y.z

• Configurable using internal web-browser or DMX-Workshop

• DHCP supported

• powerCON® TRUE1 power inlet

• PoE compatible (IEEE 802.3af - 2003)

• Factory reset and Squawk button

• Self-healing outputs, protected against continuous connection to 425VAC